Nginx+Trojan暂时滴神！
使用Nginx处理Trojan的TLS，Trojan进行回落。我愿称ta暂时滴神！
Nginx安装
CentOS：
yum update
yum install -y nginx
yum install nginx-mod-stream
Ubuntu/Debian:
apt update
apt install nginx
Nginx配置
修改/etc/nginx/nginx.conf配置文件：
stream {
server {
listen 443 ssl; # 设置监听端口为443
ssl_protocols TLSv1.2 TLSv1.3; # 设置使用的SSL协议版本
ssl_certificate /etc/nginx/ssl/xx.com.pem; # 证书地址
ssl_certificate_key /etc/nginx/ssl/xx.com.key; # 秘钥地址
ssl_session_cache shared:SSL:10m; # SSL TCP会话缓存设置共享内存区域名为
# SSL，区域大小为10MB
ssl_session_timeout 10m; # SSL TCP会话缓存超时时间为10分钟
proxy_protocol on; # 开启proxy_protocol获取真实ip
proxy_pass 127.0.0.1:1234; # 后端Trojan监听端口
}
}
请将上方代码添加到http与events中间一行
/etc/nginx/nginx.conf配置文件参考：
events {
worker_connections 768;
# multi_accept on;
}
stream {
server {
listen 443 ssl; # 设置监听端口为443
ssl_protocols TLSv1.2 TLSv1.3; # 设置使用的SSL协议版本
ssl_certificate /etc/nginx/ssl/xx.com.pem; # 证书地址
ssl_certificate_key /etc/nginx/ssl/xx.com.key; # 秘钥地址
ssl_session_cache shared:SSL:10m; # SSL TCP会话缓存设置共享内存区域名为
# SSL，区域大小为10MB
ssl_session_timeout 10m; # SSL TCP会话缓存超时时间为10分钟
proxy_protocol on; # 开启proxy_protocol获取真实ip
proxy_pass 127.0.0.1:1234; # 后端Trojan监听端口
}
}
http {
##
# Basic Settings
##
注意事项：
1. 请配置SSL证书
2. proxy_pass 127.0.0.1:1234 后端Trojan监听端口与您网站前端节点监听端口一致
3. listen端口可以1-65535随意修改，此处为客户端连接端口
centos系统请关闭selinux，不然可能导致转发失败。
sudo setenforce 0
sudo sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
XrayR Trojan配置
关键配置：
ListenIP: 127.0.0.1
EnableProxyProtocol: true
EnableFallback: true
CertMode: none
注意1：请务必确保CertMode为none，交由Nginx处理tls
注意2：在回落时请确保回落站点是http1.1，nginx如果有一个站点是h2会导致全部站点都变成h2（巨坑）
完整样例
-
PanelType: "SSpanel" # Panel type: SSpanel, V2board, PMpanel
ApiConfig:
ApiHost: "https://xxx.com"
ApiKey: "123"
NodeID: 1
NodeType: Trojan # Node type: V2ray, Shadowsocks, Trojan
Timeout: 10 # Timeout for the api request
EnableVless: false # Enable Vless for V2ray Type
EnableXTLS: false # Enable XTLS for V2ray and Trojan
SpeedLimit: 0 # Mbps, Local settings will replace remote settings, 0 means disable
DeviceLimit: 0 # Local settings will replace remote settings, 0 means disable
RuleListPath: # /etc/XrayR/rulelist Path to local rulelist file
ControllerConfig:
ListenIP: 127.0.0.1 # IP address you want to listen
SendIP: 0.0.0.0 # IP address you want to send pacakage
UpdatePeriodic: 60 # Time to update the nodeinfo, how many sec.
EnableDNS: false # Use custom DNS config, Please ensure that you set the dns.json well
DNSType: AsIs # AsIs, UseIP, UseIPv4, UseIPv6, DNS strategy
EnableProxyProtocol: true # Only works for WebSocket and TCP
EnableFallback: true # Only support for Trojan and Vless
FallBackConfigs: # Support multiple fallbacks
-
SNI: # TLS SNI(Server Name Indication), Empty for any
Path: # HTTP PATH, Empty for any
Dest: fake.website.com:80 # Required, Destination of fallback, check https://xtls.github.io/config/fallback/ for details.
ProxyProtocolVer: 0 # Send PROXY protocol version, 0 for dsable
CertConfig:
CertMode: none # Option about how to get certificate: none, file, http, dns. Choose "none" will forcedly disable the tls config.
CertDomain: "node1.test.com" # Domain to cert
CertFile: /etc/XrayR/cert/node1.test.com.cert # Provided if the CertMode is file
KeyFile: /etc/XrayR/cert/node1.test.com.key
Provider: alidns # DNS cert provider, Get the full support list here: https://go-acme.github.io/lego/dns/
Email: test@me.com
DNSEnv: # DNS ENV option used by DNS provider
ALICLOUD_ACCESS_KEY: aaa
ALICLOUD_SECRET_KEY: bbb
重启并检查 Nginx 和 XrayR
systemctl restart nginx
XrayR restart
systemctl status nginx
XrayR status